Stile – Metal Sales Stile Manual User Manual
Page 2
PST-2
STILE
®
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
800.406.7387 (Corporate Office) • www.metalsales.us.com
P
anel
o
verview
PANEL PROFILE
SLOPE
SUBSTRATE
COVERAGE
LENGTH
AVAILABILITY
APPLICATION
FASTENING SYSTEM
FASTENERS
MATERIALS
FINISH
The minimum recommended slope for any Stile roofing panel is 3:12.
The recommended substrate is
5
/
8
" plywood with a 30 pound felt moisture barrier. To avoid panel distortion, use
a properly aligned and uniform substructure. If your application is over a solid substrate other than
5
/
8
" plywood,
please contact the your Metal Sales branch location (see pages PGI-2-3).
Each panel has a coverage of 39.4" (1 meter).
Minimum factory cut length is 3'-0", and the maximum panel length is 20'-0". Lengths between 3'-0" and
20'-0" will be cut at 1'-0" increments.
Stile panels are available in 26 Gauge Galvanized (G-90) coating.
Architectural panel.
Direct Fasten (exposed).
The fastener selection guide should be consulted for choosing proper fasteners for specific applications.
Quantity and type of fastener must meet necessary loading and code requirements (see PGI-12-14).
5"
1
/
2
" Step
2"
2"
12"
Available in lengths
up to 20'-0"
PERFORMANCE TEST
UL 580, UL 790, UL 263, UL 2218, Miami-Dade County, FBC
Steel Grade 40, per ASTM A-653
**
PVDF Fluorocarbon
**
Meets both Kynar 500 and Hylar 5000 specifications.
1
3
/
16
"
42.3
" Overall width
39.4
" Coverage