Memmert ICP Compressor-cooled incubators - Manual (Page 27)

D30374 | Date 10/2014 27
Operation and control
3. Press the confirmation key to
confirm. The programme is
cancelled.
Hauptschalter
>
Zu der Typenbezeichnung gibt es momentan drei Entwurfsrichtungen,
ich kann Ihnen noch nicht sagen, ob Memmert hierzu schon eine Entscheidung
getroffen hat.
Die hier gezeigt Variante, ist die von uns empfohlene Richtung.
UF 110 PLUS
ON
344
.4
444 4 .
TEMP
Set
°C
°C
FLAP 40
%
TIMER
h d
10 02
End Sept. 29 22 24
FAN
%
0
%
100
ALARM
max
444 .4°C
auto
+/- 0.0 K
min
444 .4°C
O O ON N N N O O N O
Manu
44.Sept
13:44
End
Test 012
12.11.2012
A cancelled programme cannot be resumed at the point it was cancelled. It must be
restarted from the beginning.
End of programme End of programme
The End display shows when the
programme should end.
13:44
End
Test 012
12.11.2012
►
restart the programme as described
►
select another programme for processing in menu mode (see page 44) and run it as
described.
►
return to manual mode. To do
so, reactivate it by pressing the
activation key next to the status
display, then turn the turn con-
trol until the hand symbol is is is
highlighted in colour and press
the confirmation key.
5.5 Monitoring function
5.5.1 Temperature monitoring
The appliance is equipped with a multiple overtemperature protection in accordance with
DIN 12 880. This serves to avoid damage to the chamber load and/or appliance in case of a
malfunction:
►
electronic temperature monitoring (TWW)
►
automatic temperature monitor (ASF)
►
mechanical temperature limiter (TB)
The monitoring temperature of the electronic
temperature monitoring is measured via a separate Pt100 tem-
perature sensor in the interior. Temperature monitoring settings
are made via the ALARM display. The settings made apply to all
operating modes.
Manual mode
12.09.2012 13:44
ALARM
max
38
.5°C
2.0
K
min
36
.5°C
auto
+-