Memmert ICP Compressor-cooled incubators - Manual (Page 19)

D30374 | Date 10/2014 19
Putting into operation
4. Putting into operation
Caution:
The first time the appliance is operated, it must not be left unattended until it has
reached the steady state.
4.1 Connecting the appliance
Caution:
Observe the country-specific regulations when
making connections (e.g. in Germany DIN VDE
0100 with residual current circuit breaker). Observe
the connection and power ratings (see nameplate
and “Technical Data” on page 12). Make sure to
establish a safe PE conductor connection.
Plug the provided power cable into the rear of the appli-
ance and connect it to the power supply ( Fig. 9 ).
Lay the power cable so that
►
it is always accessible and within reach so it can be disconnected quickly in the event of
failure or emergencies;
►
no one can trip over it;
►
it does not come into contact with any hot parts.
4.2 Switching on
Switch on the appliance by pressing the main switch on
the front of the appliance ( Fig. 10 ).
The starting process is shown by three animated white
dots . If the dots have another colour, an error has . If the dots have another colour, an error has
occurred (see page 34).
After the first start-up, the appliance display is set
to English by default. You can change the language
as described from page 36. However, to get a ba-
sic overview of operating the appliance, you should
read the following chapter first.
Fig. 9 Connect the power
cable to the rear of the appliance
Fig. 9 Fig. 9 Connect the power Connect the power
Hauptschalter
>
Zu der Typenbezeichnung gibt es momentan drei Entwurfsrichtungen,
ich kann Ihnen noch nicht sagen, ob Memmert hierzu schon eine Entscheidung
getroffen hat.
Die hier gezeigt Variante, ist die von uns empfohlene Richtung.
UF 110
PLUS
ON
344
.4
444 4 .
TEMP
Set
°C
°C
FLAP
40
%
TIMER
h d
10 02
End Sept. 29 22 24
FAN
%
0
%
100
ALARM
max
444 .4°C
auto
+/- 0.0 K
min
444 .4°C
O O ON N N N O O N O
Manu
44.Sept
Fig. 10 Switch on appliance