Memmert AtmoCONTROL - Manual (Page 32)

32 D24042 | Date 09/2014
AtmoCONTROL
8. Event codes of the log fi le Log.txt
(see page 12)
Error codes for Generation 2012 appliances Status: October 09, 2012
In case of a hardware error of the oven, the controller displays the following error codes in a status /
error window, as well as logs them in the “Log.txt” file in the “Config” directory on the SD card.
The position of the error number further specifies the position of the error.
Error code Parameter Description
101: OS Error Operating system error
102: File System Error File system error
103: USB Error USB error
104: GUI Error Graphical user interface error
105: IP Stack Error Ethernet error
106: I2C Bus Error 12C bus error
107: RTC Error Realtime clock error
108: RAM Disk Error RAM disk error
109: WatchDog Reset Watchdog error
Power Supply OK 110: Power Supply OK
111: Controller Restart Restart after reset
201: Config Error Configuration error
202: Calib User Error Error in calibration file (user)
203: Calib System Error Error in calibration file (calibration system)
204: PID Config Error Error in PID parameters
205: User Config Error Error in user settings
206: Battery Error Battery low
207: SD Card Space Warning at 95% disk space usage
208: SD Card Full Error, SD card is full
209: SD Card Missing SD card is missing
210: Failed To Copy Protocol Error copying the protocol
211: Restauration Failed Error restoring LastState
212: Max Count Of Profiles Maximum number of profiles on SD card reached
301: Fan Error Fan speed error
302: Heating Error Heating error
303: Temp Limitor Temperature limiter has triggered
304: Door open Door is opened
305: Hzg Err 2 00000 Triac optocoupler heating 1 power module 1
defective
0 2 0000 Triac optocoupler heating 2 power module 1
defective
Note:
The position of the red digit
indicates the defective stage
of the appliance.
00 2 000 Triac optocoupler heating 1 power module 2
defective
000 2 00 Triac optocoupler heating 2 power module 2
defective
0000 2 0 Triac optocoupler heating 1 power module 3
defective
00000 2 Triac optocoupler heating 2 power module 3
defective
1 00000 Triac heating 1 power module 1 defective
0 1 0000 Triac heating 2 power module 1 defective
00 1 000 Triac heating 1 power module 2 defective
000 1 00 Triac heating 2 power module 2 defective