Memmert AtmoCONTROL - Manual (Page 10)

10 D24042 | Date 09/2014
AtmoCONTROL
3.2.3 Status bar
The status bar gives an overview of the appliances logged on to AtmoCONTROL. Appliances
can be added and removed again.
If the appliance is connected to the computer via Ethernet and it has already been logged
on once, it is automatically recognised and the current operating state (temperature,
alarms) is displayed (Fig. 1).
UF 260plus Laboratory
180
.0°C
i
3 4
1 2
Fig. 1
An appliance of type UF 260 PLUS (1), named "Laboratory" (2) by the user, is registered via Ether-
net (3) in AtmoCONTROL; current temperature 180.0 °C (4)
3.3 Installing device licence via Ethernet (Single Display Devices)
1. Click on “Help”“Upload license file to device”.
2. In the window now opening, select the licence file (*.lic) and click “OK”.
3. Enter the IP address of the appliance you want to
transfer the licence to.
A description of how to set the IP address is
provided in the user manual of the correspond-
ing appliance.
4. Click on “Upload” to start transferring the licence. The appliance can now be added (regis-
tered) in AtmoCONTROL as described in the following section.
3.4 Adding and disconnecting devices
3.4.1 Adding device connected via Ethernet
1. Click on „Device"„Connect online via Ethernet”.
2. In the window opening now, enter the IP address of the
device. Default setting is the standard IP address all de-
vices have at delivery (192.168.100.100). The IP address
entered here must correspond to that of the device.