Brother DCP-110C - Manual (Page 99)

MAKING COPIES 9 - 5
Increasing copy speed or quality
You can select the copy quality. The default setting is Normal .
1
Press ( Copy ) to illuminate it in green.
2
Load your document.
3
Use the dial pad to enter the number of copies you want
(up to 99).
4
Press Copy Options and ▲ or ▼ to select Quality .
5
Press ▲ or ▼ to choose the copy quality ( Fast , Normal or
Best ).
Press Menu/Set .
6
Press Mono Start or Colour Start .
Normal Recommended mode for ordinary printouts. Good
copy quality with adequate copy speed.
Fast Fast copy speed and lowest ink consumption. Use
FAST to save time (document to be proof-read, large
documents or many copies).
Best Use this mode to copy precise images such as
photographs. BEST uses the highest resolution and
slowest speed.