Brother DCP-110C User Manual
Page 19
INTRODUCTION 1 - 3
4
Dial Pad
Use these keys to dial telephone and
fax numbers and as a keyboard for
entering information into the machine.
The # key lets you temporarily
switch the dialling mode during a
telephone call from Pulse to Tone.
(Not available in New Zealand)
5
Mode keys:
PhotoCapture
Lets you access the PhotoCapture
Center
™
mode.
Copy
Lets you access Copy mode.
Fax
Lets you access Fax mode.
Scan
Lets you access Scan mode.
6
Copy Options
You can quickly and easily select
temporary settings for copying.
7
Fax Resolution
Adjusts the resolution when you
send a fax.
8
Mono Start
Lets you start sending faxes or
make copies in black and white.
Also for MFC-620CN, lets you start
a scanning operation (in colour or
mono, depending on the scanning
setting on your PC).
9
Colour Start
Lets you start sending faxes or
make copies in full colour.
Also for MFC-620CN, lets you start
a scanning operation (in colour or
mono, depending on the scanning
setting on your PC).
0
Stop/Exit
Stops an operation or exits from the
menu.
A
Power Save
You can turn the machine to power
save condition.
B
Navigation keys:
Menu/Set
The same key is used for Menu and
Set operations.
Lets you access the Menu to
program and store your settings in
the machine.
You can press these keys to adjust
the volume.
▲
Search/Speed Dial
Lets you look up numbers that are
stored in the dialling memory. It also
lets you dial stored numbers by
pressing # and a two-digit number.
Press to scroll backward to a menu
selection.
▲
or
▼
Press to scroll through the menus
and options.
C
Liquid Crystal Display (LCD)
Displays messages on the screen to
help you set up and use your
machine.
The LCD examples in this User’s
Guide are for models with a two-line
display. There may be slight
differences between the examples
and models that have a one-line
display.
▲