Brother DCP-110C - Manual (Page 62)

4 - 3 SETUP RECEIVE
Setting the Ring Delay
The Ring Delay sets the number of times the machine rings before it
answers in
Fax Only , Fax/Tel and MC:MSG CTR modes. If you
have extension phones on the same line as the machine or subscribe
to the telephone company’s service, keep the Ring Delay setting of 4.
(See Operation from extension telephones on page A-14.)
1
If it is not illuminated in green, press ( Fax ).
2
Press Menu/Set , 2 , 1 , 1 .
3
Press ▲ or ▼ to select Ring Delay .
Press Menu/Set .
4
Press ▲ or ▼ to select how many
times the line rings before the machine answers (02-10 for
Australia, 01-10 for New Zealand, 00-10 for some countries).
Press Menu/Set .
(If you select 00, the line won’t ring at all.)
5
Press Stop/Exit .
Toll Saver must be Off to use the Ring Delay setting.
(See Setting Toll Saver (TAD mode) on page 4-4.)
Setup Receive
Ring Delay