Installing the 400-st1 cascade module – Bay Technical Associates BayStack 400-ST1 User Manual
Page 19
17
Installing the 400-ST1 Cascade Module
The Cascade Module slot on the BayStack 450 switch can
accommodate a single 400-ST1 Cascade Module.
To install a 400-ST1 Cascade Module into the Cascade
Module slot, follow these steps:
1.
Unplug the AC power cord from the back of the
switch.
2.
Loosen the thumbscrews and remove the filler
panel from the Cascade Module slot (
Figure 7
).
Figure 7.
Removing the Filler Panel
3.
Insert the 400-ST1 Cascade Module into the
chassis slot taking care to slide the module into the
guides provided on the chassis (
Figure 8
).
BS0036A
1 = Filler panel
2 = Cascade module slot
1
2