Bay Technical Associates BayStack 400-ST1 - Manual (Page 18)

16
Installation
This section describes how to connect up to eight
BayStack 10/100/1000 Series switches into a redundant
stack. The switch stack can consist of any combination of
BayStack 450-24T and BayStack 450-12T switch models.
Before installing your equipment, review the previous
sections of this guide.
This section includes the following topics:
• Installing the 400-ST1 Cascade Module
• Installing and connecting multiple switches
• Connecting power
• Verifying the installation
After verifying the installation as described in
“Verifying the Installation ” on page 24 of this guide, refer
to the Using the BayStack 450 10/100/1000 Series Switch
guide to set up the stack and customize the stack
configuration according to your system requirements.
Note: For stacking three or more units
(maximum 8 units per stack), order the optional
1 meter (39.27 inch) cascade max-return cable
(Bay Networks Order No. AL2018001).