Labnet Prism R Refrigerated Microcentrifuge - Manual (Page 7)

4
Open the Prism R refrigerated microcentrifuge package and confirm
that all items are included:
Prism R unit with a 24 x 1.5/2ml
rotor and a rotor lid
Operation manual
Electric fuses (7A &3.15A) Warranty card
Rotor wrench Power cord
If there are any items missing, damaged, or not according to your
order, please contact your distributor or sales representative
immediately.
Note: Please use 7A fuse in power source 100~120/50~60Hz
countries, while 3.15A fuse is for power source 200~230V/50~60Hz
countries.
3.2. Initial Operation
Place the machine on a stable, flat table. Please keep the machine at
least 30 cm from the surrounding area or objects.
Mains power and frequency “ MUST ” be compatible with the
information given on the product label on the rear of the centrifuge.
Connect the power cord to the power socket of the centrifuge, then to
the power source. Switch the Power On/Off switch to turn on the
centrifuge. After the LCD display is on and the buzzer beeps twice,
the centrifuge is ready to operate.