Labnet Prism R Refrigerated Microcentrifuge - Manual (Page 4)

Prism R Refrigerated Microcentrifuge 1
1. Safety Precautions
Before using the Prism R refrigerated microcentrifuge for the first
time, please read this entire operating manual carefully. To guarantee
problem free, safe operation, it is essential to observe the following
points:
1.1. Operation Safety Precautions
1. When using infectious, radioactive, toxic and other solutions
which may pose health risks, please observe the appropriate
safety precautions.
2. Do not use this machine in a potentially explosive environment
or with potentially explosive chemicals.
3. Install the machine in location free of excessive dust.
4. Avoid placing the machine in direct sunlight.
5. Choose a flat, stable surface capable of withstanding the
weight of the machine.
6. Install the machine in the room temperature 15~30°C, relative
humidity 20~80%.
7. Don’t block the air vents.
8. Make sure the power source conforms to the required
power supply specifications.
9. To avoid electric shock, make sure the machine is plugged
into a grounded electric outlet.
10. Do not allow water or any foreign objects to enter the various
openings of the machine.
11. Switch off the power switch before cleaning or performing any
service on the machine, such as replacing the fuses.
12. The rotor and the rotor lid must always be installed
securely on the motor shaft.
13. Always load the rotor symmetrically. Each tube should be
counterbalanced by another tube of the same type and
weight.