Labnet Prism R Refrigerated Microcentrifuge - Manual (Page 10)

Prism R™ Refrigerated Microcentrifuge 7
short-run of set speed. The short-run will stop if the button is
released.
Note:
1. For safety reasons, the (START/STOP) knob will be
inactivated when the lid is open. A symbol “ ” will be
flashing until the lid is closed.
3.6. Emergency Lid Release
When the lid can’t be opened by pressing the button, users can
open the lid manually. First, turn off the power of the centrifuge.
Second, use a flat-head screw driver or other tool to remove the
Emergency Lid Release Plug ( Please refer Figure 2 ) on the
right-hand side of the machine. Third, pull the wire (attached to the
plug) while gently pushing downward on the lid. The lid willnow
release.