Koolance PC3-736SL - Manual (Page 22)

17
User Manual
Testing & Filling
Once all of the coolers have been connected, the system can be fi lled with coolant.
The refi ll tap is located on top of the reservoir. Remove the large slot-headed screw
(with a screwdriver or large coin) and insert the refi ll funnel.
Cut a very small corner in the coolant pack, and slowly fi ll the reservoir.
You may not require the whole pack of liquid.
WARNING : The liquid coolant is electrically conductive. Use caution
when fi lling the system, and keep all liquids away from computer
hardware and power cables. In case of emergency during installation,
immediately unplug the computer’s rear power cable. Dry the system
thoroughly before proceeding.
!