Koolance PC3-736SL - Manual (Page 17)

12
Each tubing connection uses a threaded compression fi tting (“hose screw”) to keep
it secure. To connect these components:
Connecting Hoses
Thread a hose screw onto the tube
end. Squeeze the tube while pushing it
fi rmly over the nozzle. Tubing should
completely cover the nozzle.
Tighten the connection by sliding the
compression fi tting down over the nozzle
and screwing securely.
If you are fi nding it diffi cult to connect
s m a l l e r t u b e s , t r y t e m p o r a r i l y
stretching-out the tube end by inserting
long-nose pliers.
Connecting PC3-700 Systems