Koolance PC3-736SL - Manual (Page 14)

9
User Manual
ATX Power Switch
The ATX “pass through” lead is responsible for shutting off your computer if sensor
channel #1 reaches 3ºC (5ºF) above the preset alarm temperature (See LED Display
for alarm confi guration).
Connect the male ATX power lead from the
PC3-700 to the chassis main power switch.
During motherboard installation, connect
the female ATX power lead from the PC3-
700 to the motherboard’s power switch
connection (often marked “PWRSW”,
“PWSW”, or “PWBT”).
This is the connection that would normally
receive the chassis power switch lead
directly.
CAUTION
:
The auto shutdown safety features of your PC3-700 will not
function properly without connecting the ATX power switch lead.
!