Klein Tools MM100 - Manual (Page 2)

Dwg Name: MM100-139569TART Dwg No: 139569T
ECO No: 15144 Pkg Dwg Ref: 1719 Rev: C
Color Reference: N/A
ENGLISH
A.B. Use properly safety rated leads.
A.
Do not attempt to measure more than 600V or 200mA.
B. Do not attempt to measure more than 10A.
C. Data Hold
• Press to hold the current input on the display.
• Press again to return to live reading.
D.E. Battery / Fuse Replacement
• When indicator is displayed on the LCD, batteries must
be replaced.
• Remove rubber boot, back screw, and replace 9V battery.
• If more than 200mA is applied to
A , replace with 250mA/250V
fast-blow fuse.
• If more than 10A is applied to B , replace with respective 10A /
500V fast-blow fuse.
FUNCtIoN INStRUCtIoNS
200m
20m
600
600
200
200
2
200m
20
600
200
200m
20m 10A
9V
1.5V
200 BATT.
200m
200
2M
200k
20k
2k
200m
20m 10A
9V
1.5V
200
BATT.
10A
9V
1.5V
200
2k
BATT.
200
200k
20k
2k
3
5
6
200m
20m 10A
9V
200
200
• Attach red lead to “mAμA” input.
• Current above 200mA will require fuse replacement.
4. DC Current (small): < 200mA
COM m
10A/250V ~ 250mA/250V ~
600V MAX
200m
2
20m
200m
20
600
600
200
10A 9V
1.5V
200
2M 200k
20k
200
2k
200 BATT.
COM m
10A/250V ~ 250mA/250V ~ 600V MAX
200m
2
20m
200m
20
600
600
200
10A 9V 1.5V
200
2M 200k
20k
200
2k
200 BATT.
COM m
10A/250V ~ 250mA/250V ~ 600V MAX
HOLD
200m
2
20m
200m 20
600
600
200
10A 9V 1.5V
200
2M 200k
20k
200
2k
200 BATT.
COM m
10A/250V ~ 250mA/250V ~ 600V MAX
HOLD
200m
2
20m
200m 20
600
600
200
10A 9V 1.5V
200
2M 200k
20k
200
2k
200 BATT.
COM m
10A/250V ~ 250mA/250V ~ 600V MAX
200m
2
20m
200m 20
600
600
200
10A 9V 1.5V
200
2M 200k
20k
200
2k
200 BATT.
COM m
10A/250V ~ 250mA/250V ~ 600V MAX
HOLD
200m
2
20m
200m
20
600
600
200
10A 9V 1.5V
200
2M 200k
20k
200
2k
200 BATT.
9V
COM m
10A/250V ~ 250mA/250V ~ 600V MAX
200m
2
20m
200m
20
600
600
200
10A 9V 1.5V
200
2M 200k
20k
200
2k
200 BATT.
COM m
10A/250V ~ 250mA/250V ~ 600V MAX
200m
2
20m
200m 20
600
600
200
10A 9V 1.5V
200
2M 200k
20k
200
2k
200 BATT.
COM
m
10A/500V ~ 250mA/250V ~
600V MAX
CATIII
MM100
HOLD
200m
2
20m
200m
20
600
600
200
10A
9V
1.5V
200
2M
200k
20k
200
2k
200 BATT.
B
C
E
On Back
D
A
FEAtURE DEtAILS
MM100
Instruction Manual
GENERAL SpECIFICAtIoNS
The Klein Tools MM100 is a manual ranging multimeter. It measures
AC/DC voltage, DC current, and resistance. It can also test batteries,
diodes, and continuity.
• operating Altitude: 2000 meters
• Relative Humidity: 75% max operating
• operating temperature: 0°C / 32°F to 40°C / 104°F < 75% R.H.
• Storage temperature: -20°C / -4°F to 60°C / 140°F < 80% R.H.
• Accuracy temperature: 18°C / 64°F to 28°C / 82°F < 75% R.H.
• temperature Coefficient: 0.1*(specified accuracy) / °C
• Sampling Frequency: 3 samples per second
• Dimensions: 5.91" x 2.76" x 1.97" (150 mm x 70 mm x 50 mm)
• Weight: 8.36 oz. (237 g)
• Calibration: Accurate for one year
• Safety Rating: CAT III 600V
• Listing: ETL & cETL standard UL 3111-1 listed
• pollution Degree: 2
• Accuracy: ± (% of reading + # of least significant digits)
WARNINGS
To ensure safe operation and service of the tester, follow these instructions.
Failure to observe these warnings can result in severe injury or death.
• Before each use, verify meter operation by measuring
a known voltage or current.
• Never use the meter on a circuit with voltages that exceed the
category based rating of this meter.
• Do not use the meter during electrical storms, or in wet weather.
• Do not use the meter or test leads if they appear to be damaged.
• Ensure meter leads are fully seated, and keep fingers away from
the metal probe contacts when making measurements.
• Do not open the meter to replace batteries while the probes
are connected.
• Use caution when working with voltages above 60V DC,
or 25V AC RMS. Such voltages pose a shock hazard.
• To avoid false readings that can lead to electrical shock,
replace batteries if a low battery indicator appears.
• Unless measuring voltage or current, shut off and lock out
power before measuring resistance or capacitance.
• Always adhere to local and national safety codes. Use individual
protective equipment to prevent shock and arc blast injury where
hazardous live conductors are exposed.
1. AC Voltage: < 600V
• Start with this setting if current level is unknown.
• Attach red lead to “10A” input.
• Current above 10A will require fuse replacement.
SyMBoLS USED oN LCD
overload: Range Exceeded A Current in Amps
-
Negative DC Value Diode test
Low Battery Continuity test
H Hold Active M Mega 10 6
V Voltage Measurement k Kilo 10 3
Ω Resistance in ohms µ Micro 10 -
m Milli 10 -3 Dangerous Levels
2. DC Voltage: < 600V
3. DC Current (large): < 10A
5. Resistance < 2M Ω
• Do not attempt resistance measurement on a live circuit.
6. Battery test
7. Continuity < 100 Ω
8. Diode test
SyMBoLS
~
AC Alternating Current Warning or Caution
DC Direct Current Dangerous Levels
DC/AC Voltage or Current Double Insulated Class II
Ground AC Source
200m
2
20m
200m
20
600
600
200
10A
9V
1.5V
200
2M
200k
20k
200
2k
200 BATT.
8
2
1
4
7
MM100 Instruction Manuals - MASTER.indd 5-8 11/20/2013 11:45:24 AM