Klein Tools VDV526-052 - Manual (Page 2)

WARNINGS:
Always wear approved eye protection.
Do NOT use on energized circuits.
ENGLISH
2
LAN Scout™ Jr.
Instruction Manual
GENERAL SPECIFICATIONS
The Klein Tools LAN Scout™ Jr. is a portable data cable tester. It tests and
troubleshoots RJ45 terminated cables and provides built-in tone generation
for cable tracing.
• Dimensions: 4.6" x 2.3" x 1.1" (11.7 x 5.8 x 2.8 cm)
• Weight: 4.0 oz. (115 grams) with battery and remote
• Operating Temperature: 0°C / 32°F to 50°C / 122°F
• Storage Temperature: -20°C / -4°F to 60°C / 140°F
• Humidity: 10% to 90%, non-condensing
• Maximum Voltage between any two connectors pins without damage:
• RJ Jack: 66V DC or 55V AC
• Battery Life typical : 6V alkaline batteries - 4 x LR44
• Standby: 3.5 years
• Active: 80 hours
• Cable Types: Shielded or Unshielded; Cat-7, Cat-6x, Cat-5E, Cat-5,
Cat-4, Cat-3
• Maximum RJ Cable Length: 0 to 1000 feet (305 meters)
• Minimum Cable Length for Split Pair Detection : 1.5 feet (0.5 meters)
WARNINGS
To ensure safe operation and service of the tester, follow these instructions.
Failure to observe these warnings can result in severe injury or death.
• The LAN Scout™ Jr. is designed for use on unenergized cabling
systems. Connecting the LAN Scout™ Jr. to live AC power may
damage it and pose a safety hazard for the user.
• Poorly terminated RJ plugs have the potential to damage the jack on
the LAN Scout™ Jr. Visually inspect a RJ plug before inserting it into
the tester. The contacts should always be recessed into the plastic
housing of the plug. Plugging 6-position plugs into the 8-position
jack on the tester has the potential to damage the outer-most
contacts of the jack unless the plug is specifically designed for
that purpose.