Kisan Electronics ManualtailBlazer - Manual (Page 24)

Page - 22
BMW K-1200LT
For the Rack mounted LED
Light-bar, 25LED-LT is an in-line
plug-in unit. It requires a
connection to a switched power
source. 25LED-LT also makes
the Light bar to come on as a
Running Light with
programmable intensities. This
feature improves your rearward
visibility – especially since the
Light bar is mounted so high off
the ground. When the brakes are
applied the Light bar will execute
a 4-sec exponential decay flash
pattern at full intensity
The integrated taillight assembly has (2) dual contact bulbs for brakes.
Loosen both 10mm retaining bolts (one inside each saddle) to remove the
taillight assembly. You can replace brake bulbs with (2) 20W-DZ.
.
BMW tailBlazer Application
K1200LT (2) 20W-DZ OR 25LED-D
ALL CAN-bus models 20W-S 2PAK or 20W-DZ
Earlier models 20W-S, 20W-D or 100HD-M
If combination of tailBlazer products are used together, the flash
sequence will be in synch – except for the last 2 or 3 flashes.
25LED- LT
20W-DZ 2PAK