Kinze 3110 Mounted Planter Rev. 7/14 - Manual (Page 14)

TM
Model 3110 M0244-01
9/12 2-2
Machine Operation
1. Torque transport wheel 9∕16"- 18 lug bolts to 90 ft-lb (122 N-m).
2. Inflate transport/ground drive tires to 40 psi (275.7 kPa).
3. Inflate contact drive tires to 50 psi (344.7 kPa).
wARNING
Improperly operating or working on this equipment could result in
death or serious injury. Read and follow all instructions in Operator
Manual before operating or working on this equipment.
wARNING
Loose transport wheel lug bolts can result in wheel separation
from planter and cause death, serious injury, and damage to
property and equipment. Torque transport wheel 9∕16"- 18 lug bolts
to 90 ft-lb (122 N-m) before operating planter for the first time and
periodically after.
wARNING
Explosive separation of rim and tire parts can cause death or serious
injury. Overinflation, rim and tire servicing, improper use of rims and tires,
worn, or improperly maintained tires could result in a tire explosion.
Contact drive
Transport/ground drive
INITIAL PREPARATION
Following information is general in nature to aid in preparation of tractor and planter for use, and to provide general
operating procedures. Operator experience, familiarity with the machine, and the following information should combine
for efficient planter operation and good working habits.
Lubricate the planter and row units per the lubrication information in this manual. Make sure all tires have been properly
inflated. See “Tire Pressure”. Check all drive chains for proper tension, alignment and lubrication.