Kifco T40x1320 - Two Axle 380,601 - Present Operator Manual - Manual (Page 42)

P/N 19302460 Copyright © April 2012 by Kifco ® Inc.
Battery Replacement
Only use 1.5v alkaline batteries (AA). Rechargea-
ble batteries are not compatible with this sys-
tem.
 Remove the 4 screws from the cover.
 Replace the batteries.
 Press the reset button to restart the circuit.
When replacing the battery the Taky will not
have to be completely reprogrammed; however,
you will need to reset the length.
Electrical Connections
 Terminals VB+ and VB– are not used
(Figure 1)
 Terminals S1+ and S1– must be con-
nected to the pinion sensor (Polarity
Same) (Figure 2)
 Terminals S2+ and S2– must be con-
nected to gearbox tach shaft sensor
(Polarity Same)
Taky Maintenance
39