Hydraulic controls – Kifco T40x1320 - Two Axle 380,601 - Present Operator Manual User Manual
Page 33
P/N 19302460
Copyright © April 2012 by Kifco
®
Inc.
Hydraulic Controls
Hydraulic controls are standard on the ST6 & ST7 Chassis (models 37x1220, 40x1250, 40,1320 & 45,1150).
Hydraulic controls are optional on the ST5 chassis. The stabilizer legs and sprinkler cart lift are linked together
mechanically so the hydraulic cylinders move both the stabilizer legs and the sprinkler cart lift at the same
time.
The tractor that tows the Water-Reel typically provides hydraulic power for the Water-Reel’s hydraulic con-
trols. The control valve on the tractor controls the lifting and lowering of the legs and sprinkler cart.
Caution! The operator should understand the hydraulic functions before attempting to
operate the hydraulic controls. Operate the tractor or hydraulic power source at low
engine speeds when using the Water-Reel hydraulics.
Hydraulic Cylinders & Stabilizer Legs
Hydraulic Sprinkler
Cart Lift
Sprinkler Cart Lift
Height Adjustment
30
- E40x1250 380,601 - Present Operator Manual T40x1250 380,601 - Present Operator Manual E37x1220 380,601 - Present Operator Manual T37x1220 380,601 - Present Operator Manual E37x1080 380,601 - Present Operator Manual T37x1080 380,601 - Present Operator Manual E33x1120 380,601 - Present Operator Manual E30x1200 380,601 - Present Operator Manual T33x1120 380,601 - Present Operator Manual T30x1200 380,601 - Present Operator Manual E30x980 380,601 - Present Operator Manual T30x980 380,601 - Present Operator Manual