Kifco T40x1320 - Two Axle 380,601 - Present Operator Manual - Manual (Page 4)

P/N 19302460 Copyright © April 2012 by Kifco ® Inc.
Safety
Owner’s Responsibilities
The owner is responsible for the safe operation of this product. The important safeguards and instructions ap-
pearing in this manual are not meant to cover all possible conditions and situations that may occur. Common
sense and caution should be used at all times by all operators to prevent damage or injury to the operator.
The owner is responsible for:
 Reading and understanding this manual and video. If any instructions remain unclear contact your local
dealer or Kifco for further instructions.
 Operating the machine strictly according to prescribed limitations.
 Properly training others who may be permitted to operate the machine.
 Heed the rules of safety, including but not limited to those in these instructions.
 Exercising good judgment relating to safe operation and safe conduct by operators and spectators whether
invited or not.
 Always bringing the safety decals and placards on the machine to the attention of operators and spectators.
 Keeping all shields and guards in place!
Read and Heed The Special Messages!
This safety alert symbol is used to indicate messages related to safety. When you see this safety symbol, obey
the safety message to avoid personal injury, property damage, or both.
A “Caution” message in this manual or on a machine placard means that you could be injured and/or equipment
or property may be damaged if you do not follow instructions.
A “Warning” message in this manual or on a machine placard means that a hazard exists
that could result in severe personal injury or death.
A “Danger” message in this manual or on a machine placard means that a hazard exists
that will result in severe personal injury or death.
1