JUMO 902006 RTD Temperature Probe for Devices and Plants Tested According to DIN EN 14597 Data Sheet User Manual
JUMO Equipment
2013-07-30/00311472
Data Sheet 902006
Page 1/12
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14
36039 Fulda, Germany
Postal address:
36035 Fulda, Germany
Phone:
+49 661 6003-0
Fax:
+49 661 6003-607
E-mail:
Internet:
www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: +44 1279 635533
Fax:
+44 1279 635262
E-mail:
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
6733 Myers Road
East Syracuse, NY 13057, USA
Phone: 315-437-5866
1-800-554-5866
Fax:
315-437-5860
E-mail:
Internet: www.jumousa.com
www.i
RTD Temperature Probe
for Devices and Plants Tested/
Inspected According to DIN EN 14597
DIN EN 14597
• For heat transmission plants according to DIN 4754
• For temperatures of up to 700 °C
• As single, double, or triple RTD temperature probes
• For water, oil, or air
• For tested control and limitation devices
The RTD temperature probes specified in this data sheet can be used in connection with tem-
perature control and limitation devices tested/inspected according to DIN EN 14597 (DIN 3440)
in heat transmission plants according to DIN 4754.
RTD temperature probes are the preferred choice for measuring temperatures in liquids and
gases. Application areas include air conditioning and refrigeration technology as well as heat-
ing, furnace/kiln, and apparatus engineering.
Form B terminal heads are suitable for ambient temperatures up to 100 °C.
Protection tubes made of various materials protect the measuring insert against chemical influ-
ences and mechanical damage. The appropriate protection tube material is selected according
to the conditions on site.
A Pt100 temperature sensor according to DIN EN 60751, class B is used in the measuring insert
in a 2-wire-circuit as standard.
Changes to the described versions require new design approval.
Important information: state the part no. from price sheet 902006 when ordering!