JUMO 707030 dTRANS T03 2-Wire/3-Wire Transmitter Data Sheet - Manual (Page 4)

2013-07-31/00391028
Data Sheet 707030 JUMO GmbH & Co. KG • 36035 Fulda, Germany Page 4/10
Technical data for 3-wire transmitter
(Types 707033/..., and 707034/...)
Input for resistance thermometer
Measurement circuit monitoring to NAMUR recommendation NE43
Output
Supply voltage
dTRANS T03 BU
Type 707033/...
dTRANS T03 TU
Type 707034/...
Measurement input Pt100 (EN 60751)
Range limits -200 to +850°C
Connection circuit 2-wire or 3-wire circuit
Smallest span 25°C
Largest span 1050°C
Unit measuring range configuration in °C or °F
Zero shift for spans < 75°C fixed zero: -40°C, -20°C, 0°C, 20°C, 40°C
for span 75°C: ±50°C
for spans > 75°C: see “Range organization” on page 7
Sensor lead resistance
for 3-wire connection
 11 per conductor
Sensor lead resistance
for 2-wire connection factory-set: 0
lead resistance,
settable through setup program
Sensor current
 0.5mA
Sampling rate continuous measurement because of analog signal path
Underrange 0V
Overrange rising to
 11V to  14V (typically 12V)
Probe short-circuit 0V
Probe and lead break positive: rising to
 11V to  14V (typically 12V)
negative: 0V
Output signal DC voltage 0 — 10V
Transfer characteristic linear with temperature
Transfer accuracy
 ± 0.2% a
a All details refer to the range-end value 10 V
Damping of ripple
on supply voltage
> 40dB
Load
10k
Load error
 ± 0.1% a
Settling time on a temperature change
 10msec
Calibration conditions 24V DC at approx. 22°C
Calibration/configuration accuracy
 ± 0.2% a, b, c
or
 ± 0.2°C b
b The larger value applies
c If the measuring range end value > 600 °C then the calibration or configuration accuracy is  ± 0.4 %
Supply voltage (Ub) 15 — 30V DC
Reverse polarity protection yes
Supply voltage error
 ± 0.01% per V deviation from 24V a
a All details refer to the range-end value 10 V