JUMO 603070 heatTHERM-AT/heatTHERM-DR Data Sheet - Manual (Page 3)

2013-03-15/00485234
Data Sheet 603070 Page 3/15
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
E-mail: [email protected]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: +44 1279 635533
Fax:
+44 1279 635262
E-mail: [email protected]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
6733 Myers Road
East Syracuse, NY 13057, USA
Phone: 315-437-5866
1-800-554-5866
Fax: 315-437-5860
E-mail: [email protected]
Internet: www.jumousa.com
Technical data
Case
Electrical data
Type 5 + 6 Type 7 + 8
Case Case bottom section: PA (reinforced)
Color: Silver-gray RAL 7001 (for TZ 061 black)
Case lid: ABS with inspection glass (PMMA)
Color: cobalt-blue RAL 5013 (for TZ 061 light-gray,
RAL 7035)
Setpoint adjustment
TR Switching point can be adjusted externally with the
rotary knob.
- -
TW, STW, STB, ATW Switching point can be adjusted with a screwdriver
once the case lid has been removed. The set switch-
ing point can be checked through the inspection
glass.
Switching point can adjusted with a screwdriver.
Protection type IP 54 according to EN 60 529 IP 20 according to EN 60 529
Cable inlet Cable gland M20 x 1.5,
for cable-
∅ 6-12 mm
Cable connection directly on terminals
Capillary ∅ 1.5 mm - min. bending radius of the capillary 5 mm - material: copper (Cu) or stainless steel (CrNi, 1.4301)
Case fastening Pipe mounting with clamping belt for pipe diameter
15-100 mm, thermowell mounting, wall mounting Wall mounting, DIN rail installation TH35 according to
DIN EN 60715
Weight Approx. 0.2 kg
Electric contact Snap-action switch with single-pole changeover contact
Switching capacity TR / TW / STW / ATW STB
On the N/C contact (contact deck 1-2):
AC 230 V +10 %, 16 (2.5) A, cos
ϕ = 1 (0.6),
DC 230 V +10 %, 0.25 A
On the N/C contact (contact deck 1-2):
AC 230 V +10 %, 16 (2.5) A, cos
ϕ = 1 (0.6),
DC 230 V +10 %, 0.25 A
On the N/O contact (contact deck 1-4):
AC 230 V +10 %, 6.3 (2.5) A, cos
ϕ = 1 (0.6),
DC 230 V +10 %, 0.25 A
On the signal contact (contact deck 1-4):
AC 230 V +10 %, 2 (04) A, cos
ϕ = 1 (0.6),
DC 230 V +10 %, 0.25 A
Electrical connection contact (plug-type terminal)
"Push-In ® " terminal technology: patented connection technology by Weidmüller GmbH & Co. KG, Detmold, Germany
Connection cross section 0.75 to 2.5 mm 2 fine wired (single-wire, fine wired with ferrule)
Switching reliability To ensure the greatest possible switching reliability, we recommend a minimum load of:
AC / DC = 24 V, 100 mA for silver contacts
AC / DC = 10 V, 5 mA for gold-plated contacts (TZ 702)