JUMO 602021 Panel-Mounted Thermostat EM Series Up to 500C Data Sheet - Manual (Page 3)

Data Sheet 602021
2014-01-20/00073206
Page 3/14
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
E-mail: [email protected]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: +44 1279 635533
Fax:
+44 1279 635262
E-mail: [email protected]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
6733 Myers Road
East Syracuse, NY 13057, USA
Phone: 315-437-5866
1-800-554-5866
Fax: 315-437-5860
E-mail: [email protected]
Internet: www.jumousa.com
Technical data
Table of control ranges and probes for TR, TW, TB – gas-filled
Control ranges and temperature probes for STB and STW (STB) – liquid-filled
Control ranges and temperature probes for STB and STW (STB) – gas-filled
When the switching points are permanently factory-set, the deactivation value must be specified in addition to the control range
(e.g. control range 80 to 100 °C, permanently set to 95 °C).
Capillary and temperature probes
Note:
Upon request the capillary length can be increased up to a maximum of 5,000 mm if the allowable temperature on the sensor, capillary, and
switching head is not reached.
Please let us know the actual temperature values to which the thermostat is exposed.
Control range/
limit value range
°C
Switching
differential
%
Max.
probe
temperature
°C
Max.
switching head
temperature
°C
Max.
capillary length
in mm
Max.
sequence
contact gap
°C
Probe length "L" in mm,
probe Ø "d" in mm,
Ø "6" = Standard
Ш 6 Ш 8
20 to 400 0 6
10
+460
+500
+80 5000
0 75
200
237
127 137
0 81
20 to 500 3/5
0 6
10
+575 +80
1000
5000
5000 0 48
0 95
250
278
176
0 95
158
106
0 65
Setting range
°C
Scale range
°
Մ
Max.
probe
temperature
°C
Max.
switching head
temperature
°C
Max.
capillary length
in mm
Limit value
tolerance
°C
Probe length "L" in mm,
probe Ø "d" in mm,
Ø "6" = Standard
Ш 6 Ш 8
75 to 100 78 +125
+80 5000
+0
-7
84 63
85 to 110 78 +135
+0
-7
120 to 150 77 +173
+0
-9
80 57
160 to 200 79 +230
+0
-12
64 49
210 to 250 71 +288
+0
-13
61 47
250 to 300 79 +345
+0
-16
55 –
Setting range
°C
Scale range
°
Մ
Max.
probe
temperature
°C
Max.
switching head
temperature
°C
Max.
capillary length
in mm
Limit value
tolerance
°C
Probe length "L" in mm,
probe Ø "d" in mm,
Ø "6" = Standard
Ш 6 Ш 8
300 to 400 70 +460
+80 3000
+0
-23
148 92
350 to 500 72 +575
+0
-29
127 81
Type Scale limit value Capillary Temperature probe Notes
EM- . . Up to 200 °C Copper (Cu)
Ø 1.5 mm
Material no. Cu-DHP
Copper (Cu)
Material no. Cu-DHP
Hard soldered
–
Up to 350 °C Copper (Cu)
Ø 1.5 mm
Material no. Cu-DHP
Stainless steel (CrNi)
Material no. 1.4571
Hard soldered
–
Up to 500 °C Stainless steel (CrNi)
Ø 1.5 mm
Stainless steel (CrNi)
Material no. 1.4571
Welded
–
Up to 350 °C Stainless steel (CrNi)
Ø 1.5 mm
Stainless steel (CrNi)
Material no. 1.4571
Welded
Available at
extra cost
Capillary length Standard: 1000 mm, max. 5000 mm
Min. bending
radius
of capillary
5 mm