JUMO PC Security Manager Software PCS (B 70.9703.0) - Manual (Page 48)

7 Data transfer to device
48
7.2 Transfer via interface
Data transfer via interface is possible through one of the following interfaces:
Setup – RS232C You will need the interface cable (including adapter) for this. It is available as
an accessory for the recorder.
RS232C
v For the pin assignment, please refer to the Interface Description
B 70.6560.2.0.
RS422/485
v For the pin assignment, please refer to the Interface Description
B 70.6560.2.0.
Ethernet The recorder or the PC can be connected to the network using the usual
commercially available network cables (RJ45 connector). If the recorder and a
PC are to be directly connected, please use a crossover cable.
Starting the
transfer Use the toolbar or the menu Data transfer ! Device rights file to device in
order to transfer the rights file.
Paperless recorder PC
Setup interface RS232C
RS232C RS232C
RS422/485 RS422/485
(plug-in card or converter)
Ethernet Ethernet
TTL/RS 232 converter
Adapter
H
Only one 1 PC program (client such as PCC, PCS or setup
software) at a time can access the device (server) via the
Ethernet interface.
Device rights file – to device