JULABO SW23 Shaking Water Baths - Manual (Page 33)

Shaking Water Baths
33
Disturbances that are not indicated.
Warning:
D a n g e r o f e l e c t r i c s h o c k !
 The exchanging of the fuses are to be carried out only by qualified
service personnel.
 Before exchanging the fuses, turn off the mains power switch and disconnect
the power plug from the mains socket!
 Only use fine fuses with a nominal value as specified.
Mains fuses
 Pull the mains plug from the power outlet before opening the
equipment!
 The mains fuses are located behind side plate (13).
The side plate is fastend to the casing with 6 screws .
(Fine fuse T 10.0 A, dia. 5 x 20 mm)
Sicherungen
Fuses
Fusibles secteur
Pump motor overload protection
The pump motor is protected against overloading. After a short
cooling interval, the motor will automatically start running.