JULABO SW23 Shaking Water Baths User Manual
Page 27
Shaking Water Baths
27
8.2. Circulator pump on/off
Only shaking water bath SW23 feature a circulator pump.
The pump can be set to on and off at the menu level.
At working temperatures > 80
C the pump will switch off
automatically
1.
Press
and
at the same time.
2.
Use the cursor keys
to select the menu option
PUMP
(example: „Pu1“ = Pump ON )
3.
Select the alternative state with the edit keys
and
confirm the selection with the ENTER key
(example:
„Pu0“ = Pump OFF).
4.
Press
and
at the same time.
8.3. Temperature indication in °C or °F
The working temperature can be displayed in the MULTI-DISPLAY
(LED) in
C or F as desired.
1.
Press
and
at the same time.
2.
Use the cursor keys
to select the menu option
„temperature display“
(example: „t C“ = temperature display in
C).
3.
Select the alternative state with the edit keys
and
confirm the selection with the ENTER key
. The display
now shows „t F“ = temperature display in
F.
4.
Press
and
at the same time.
Switchover to the selected display mode takes place automatically
upon leaving the menu level.