JULABO FPW91-SL Ultra-Low Refrigerated Circulators - Manual (Page 94)

Remote control
94
Command Parameter Response of circulator
in_mode_01 none Selected setpoint:
0 = Setpoint 1
1 = Setpoint 2
2 = Setpoint 3
in_mode_02 none Selftuning type:
0 = Selftuning “off”
1 = Selftuning “once”
2 = Selftuning “always”
in_mode_03 none Type of external programmer input:
0 = Voltage 0 V to 10 V
1 = Current 0 mA to 20 mA
in_mode_04 none Internal/external temperature control:
0 = Temperature control with internal sensor.
1 = Temperature control with external Pt100 sensor.
in_mode_05 none Circulator in stop/start condition:
0 = stop
1 = start
in_mode_08 none Adjusted control dynamics
0 = aperiodic
1 = standard
in_hil_00
none Max. cooling power (%).
in_hil_01 none Max. heating power (%).
12.4. Status messages
Status messages Description
00 MANUAL STOP
Circulator in „OFF“ state.
01 MANUAL START Circulator in keypad control mode.
02 REMOTE STOP
Circulator in „r OFF“ state.
03 REMOTE START Circulator in remote control mode.
12.5. Error messages
Error messages Description
-01 LOW LEVEL ALARM Low liquid level alarm
-02 REFRIGERATOR ALARM Control cable of the refrigerated circulator or MVS
solenoid valve controller short-circuited or disconnected.
-03 EXCESS TEMPERATURE
WARNING
High temperature warning
-04 LOW TEMPERATURE WARNING Low temperature warning.