JULABO FL601 Recirculating Coolers - Manual (Page 43)

43
Notice:
Risk of injury for hands when mounting the venting grid.
RS232 ALARM
To maintain the full cooling performance, clean the condenser from time to time.
 Switch off the unit, disconnect mains power cable.
 Hold the venting grid, pull out and remove.
 Clean the ribbed condenser with a vacuum cleaner.
 Replace the venting grid.
 Switch on the unit.
Cleaning:
Clean the outside of the unit using a wet cloth and low surface tension water.
The recirculating cooler is designed for continuous operation under normal
conditions. Periodic maintenance is not required.
The tank should be filled only with a bath fluid recommended by JULABO. To
avoid contamination, it is essential to change the bath fluid from time to time.