JULABO FL601 Recirculating Coolers User Manual

Page 29

Text mode
Original mode

7.4.

Switching on / Start - Stop



Switching on:
The recirculating cooler is turned on and off with the mains switch.
The unit performs a self-test. All segments of the 4-digit LED temperature
DISPLAY and all indicator lights will illuminate
(as illustrated on the left).
Then the software version and the type of unit is indicated.
Examples: (v 1.02) (FL300)

The display "OFF" indicates the unit is ready to operate (standby mode).

Start:

Press enter

for about 4 seconds.

The LED temperature DISPLAY indicates the actual bath
temperature.

Stop:

Press enter

for about 4 seconds.

Turn the unit off with the mains power switch.

This manual is related to the following products:

FL300 Recirculating Coolers