JULABO FL601 Recirculating Coolers - Manual (Page 18)

18
4.3. Safety instructions
Follow the safety recommendations to prevent damage to persons or property.
Further, the valid safety instructions for working places must be followed.
 Only connect the unit to a power socket with earthing contact (PE – protective
earth)!
 The power supply plug serves as a safe disconnecting device from the line and
must always be easily accessible.
 Place the instrument on an even surface on a pad made of non-inflammable
material.
 Do not stay in the area below the unit.
 Make sure you read and understand all instructions and safety precautions listed
in this manual before installing or operating your unit.
 Never operate the unit without bath fluid in the bath.
 Do not drain the bath fluid while it is hot or cold!
Check the temperature of the bath fluid prior to draining (by switching the unit on
for a short moment for example).
 Use suitable connecting tubing.
 Make sure that the tubing is securely attached.
 Avoid sharp bends in the tubing, and maintain a sufficient distance from
surrounding walls.
 Regularly check the tubing for material defects (e.g., for cracks).
 Never operate damaged or leaking equipment.
 Always turn off the unit and disconnect the mains cable from the power source