Aastra Telecom 480i SIP (Release 1.4) - Manual (Page 30)

24 480i IP Phone User Guide
Handling Cal
ls
The values you enter in the Aastra
Web UI for the Park/Pickup call
feature are dependant on your
type of server. The following table
provides the values you enter for
the "Park Call" and "Pickup
Parked Call" fields in the Aastra
Web UI.
Park/Pickup Call Server Configuration Values
*Leave "value" fields blank to disable the park and pickup feature.
Configuring Park /Pickup using
Static Configuration
Use the following procedure to
configure the Park/Pickup call
feature using the static
configuration method.
Note: Aastra recommends you
configure either the static or the
programmable configuration,
but not both.
1. Click on Basic Settings->
Preferences->General.
2. Enter a server value in the Park
Call field to which incoming live
calls will be parked.
Note: For values to enter in this field,
see the table "Park/Pickup Call
Server Configuration Values" on
page 24 .
3. Enter a server value in the
"Pickup Parked Call" field.
Note: For values to enter in this field,
see the table "Park/Pickup Call
Server Configuration Values" on
page 24 .
4. Click to save your
changes.
5. Click on Operation->Reset.
6. In the "Restart Phone" field
click to restart the IP
phone.
Server Park Values* Pickup Values*
Aasterisk 700 700
Sylantro *98 *99
BroadWorks *68 *88
ININ PBX callpark pickup
Aastra Web UI