Intelix S-V1AR - Manual (Page 3)

Troubleshooting
Symptom Probable Causes Possible Solutions
Image not stable Defective link or
equipment Verify source and destination equipment and
cabling
Unusual colors Reversed polarity Verify the pinout on both the send and
receive baluns match. Try swapping pairs.
Smearing or weak
video contrast Exceeded cable
distance Verify cable grade and total cabling distance
Horizontal bars
moving upward in
background Ground loop
problem Verify the source and destination equipment
are at the same ground potential. Ground the
source and destination equipment.
Shaking image Ground loop
problem Verify the source and destination equipment
are at the same ground potential. Ground the
source and destination equipment.
Variance in hue EMI interference Identify possible radiating frequency sources
and isolate them from the cabling. Use
shielded twisted pair cabling.
Background
pattern EMI interference Identify possible radiating frequency sources
and isolate them from the cabling. Use
shielded twisted pair cabling.