INFICON SKY CDG025D 0.1 ... 1000 Torr / mbar - Manual (Page 19)

tina49e1-c (2009-06) 19
4 Operation
Put the gauge into operation. If you are using an INFICON con-
troller, define the measurement range (
→ [1, 2, 3]).
A warm-up time of at least ¼ hour should be allowed; for exact
pressure measurements a warm-up time of at least 2 hours is
required.
4.1 Displays
RUN ZERO
1 2 SP
LED State
Meaning
lit Measurement mode
flashing Other mode, error
<1> (CDG025D-S only) lit p ≤ setpoint level 1
flashing Adjusting setpoint <1>
<2> (CDG025D-S only) lit p ≤ setpoint level 2
flashing Adjusting setpoint <2>