INFICON Extrima Ex-certified Hydrogen Leak Detector - Manual (Page 18)

18
EN
INFICON - Operating Instructions EXTRIMA
General Settings
Calibration
The instrument must be calibrated to en-
sure that the correct values are displayed
in the Analysis Mode or Combined Mode.
Select Calibrate, Calibration Coefficient,
Calibration Time or Password Protected
Calibration. Calibration is described in
”Calibration” on p. 20 and ”Calibra-
tion” on p. 34.
Detection Mode Settings
Select Sensitivity, Range Setting, Direct
Sensitivity Adjustment, Leak Alarm
Indication and Lowest Frequency. See
”Detection Mode Settings” on p. 23.
Analysis Mode Settings
Select Leak Alarm Level, Leak Rate Unit,
Min. Presentation Time, Leak Alarm
Indications, and Lowest Frequency. See
”Analysis Mode Settings” on p. 25.
Display Settings
Select Contrast, Brightness and Screen
Save Timeout for the display. See ”Display
Settings” on p. 27.
General Settings
Various general settings. Select Langua-
ge, Change Password, Set Clock, Set Date
See ”General Settings” on p. 28.
Esc < > Enter
Display Settings
Esc < > Enter
Detection Mode Settings
Esc < > Enter
Analysis Mode Settings
Esc < > Enter
Calibration
Esc < > Enter
Calibrated
2012-09-09 11:04:59