INFICON Sensistor ISH2000 HySpeed Hydrogen Leak Detector - Manual (Page 8)

Hydrogen leak detector Sensistor ISH2000 HySpeed - Operating Instructions
8 OP-Sensistor ISH2000 HySpeed-EN-201203
EN
Reject Level limit.
• Red fixed light together with Reject on display means the instrument has detected a
leak larger than the set Reject Level limit.
• Red flashing rapidly, check message on screen. (See “Trouble-shooting” on
page 42.)
3.4 Ports and connections
Sensistor ISH2000 HySpeed
Fig 3-2. Sensistor ISH2000 HySpeed ports and connections.
Item Description
1 Probe connection
2 Ground screw
3 Power connector
4 Probe control port
5 Printer port
NOTICE!
Always connect all four wires to the Power connector to
24VDC in order to operate.
Sensistor ISH2000 HySpeed Rear View
1
2
3
4
5