HYDAC HDA 5500-3-2-DC-000 - Manual (Page 9)

HDA 5500 User Manual
- 9 -
Menu point Setting Setting range Default setting
Primary display (PriM)
Value which is normally displayed:
Measured value sensor 1
Lowest value sensor 1
Peak value sensor 1
SEn.1
Min.1
ToP.1 SEn.1
Measured value sensor 2 (Pt 100 sensor)
Lowest value sensor 2 (Pt 100 sensor)
Peak value sensor 2 (Pt 100 sensor)
SEn.2
Min.2
ToP.2
Switch point 1
Switch point 2
SP.1
SP.2
Switch point 3
Switch point 4
SP.3
SP.4
Display filter (diSP)
Display reacts slowly to measurement variations
(display delay approximately 1.3 s).
Display reacts at standard rate to measurement
variations (display delay approximately 0.6 s).
Display reacts quickly to measurement variations
(display delay approximately 0.3 s).
SloW
MEdi
FAST MEdi
Reset time (r.TiM)
Indicates how long in seconds the last peak / lowest value is
displayed for.
0..3600 0
Input signal sensor 1 (inP.1)
0..5 V
0..10 V
4..20 mA source
4..20 mA sink
5 V
10 V
mA.r.
mA.S. mA.S.