GeoDesy GD-Geo20 - Manual (Page 27)

27
7.2.5 Wireless Mode: Access Point
Use Basic Wireless Settings to setup radio interface of the device.
Basic Wireless Settings
SSID
– specify the SSID of the wireless network device.
Broadcast SSID
– enables or disables the broadcasting of the SSID for AP.
IEEE mode
– specify the wireless network mode.
Channel width
– The default channel bandwidth for 802.11 radio is 20MHz. The 802.11n allow
channel bonding in such way the total channel width becomes 40MHz.
Channel
– select the channel from the drop-down list or option Auto for auto channel. Automatic
channel selection allows Access Point to select a channel which is not used by any other wireless
device or, if there are no free channels available - to select a channel which is least occupied.
Channel list
– select the channels to create a channel list for auto channel.
Security Settings
Both sides (AP and Station) of the link must have the same security settings.
Device supports various authentication/encryption methods: