GeoDesy GD-Geo20 - Manual (Page 19)

19
In case the access point has more than one wireless interface (VAPs), the appropriate number of
tables with information about connected wireless clients will be displayed.
Peer MAC
– displays MAC address of the successfully connected wireless client.
Signal
– indicates the signal strength of the access point main and auxiliary antennas that the station
communicates with displayed dB.
Noise
– displays the noise level in dBm.
IEEE mode
– displays the IEEE mode at which the access point communicates with the particular
station.
Data rate
– displays the data rate at which the access point communicates with the particular station.
Connection time
– displays the duration of the session.
7.1.4 Routes
The Routes page displays the routing table for each interface:
7.1.5 ARP
The ARP page displays the ARP (Address Resolution Protocol) table currently recorded on the
device. Use Refresh button to reload ARP table results.
7.2 Configuration
7.2.1 Network
The Configuration | Network page allows you to control the network configuration and settings of the
device. First, the device operation mode must be defined to work as a bridge or router. The content of
the window varies depending on your selection: