GeoDesy GD-Geo20 - Manual (Page 14)

14
5 Network Mode
5.1 Bridge Mode
The device can act as a wireless network bridge and establish wireless links with other APs. In this
mode all LAN port and W ireless interface will be a part of the Bridge.
Bridge Mode
With a Bridge, all connected computers are in the same network subnet. The only data that is allowed
to cross the bridge is data that is being sent to a valid address on the other side of the bridge.
5.2 Router Mode
In router mode the device will receive internet through WAN port and will share it to the LAN ports that
will be separated with a different IP range. The type of connection to the WAN interface can be made
by Static IP, DHCP client or PPPoE client.
Router Mode
General Device Operation