General Machine Products 70524 CD3 - Manual (Page 3)

14863 (1) HELICAL GEAR
26059 (1) HELICAL
GEAR 1.75 WIDE
26060 (1) HELICAL
GEAR 1.25 WIDE
25977 (1) GEAR BOX
25988 (1) SHAFT
IDLER 2"
25990 (1) SHAFT
IDLER 2.75"
26072 (1)
PINION
25989 (1)
SPACER 2.437 LONG
25991 (1)
SPACER 4.140 LONG
14861 (2)
THRUST WASHER
24119 (2)
BEARING CAP
26064 (2)
BEARING CAP
16620(AR)
SHIM .020
16622(AR)
SHIM .005
26122(AR)
SHIM .020
26123(AR)
SHIM .005
16601 (2)
BEARING MI-44
26096 (2)
BEARING MR-52
16625 (2)
BEARING 49585
16626 (2)
BEARING 49520
26084 (2)
BEARING 72200C
26085 (1)
BEARING 72487
25997 (1)
BEARING 6310
26082 (1)
SEAL CR 27625
26098 (1)
BEARING 6310-RS1
26182 (1) COVER
16599 (2)
RETAINING
RING 5100-275
26083 (2)
RETAINING
RING 5000-425
26081 (1)
RETAINING
RING 5000-433
26161 (2)
O RING PLUG
26277 (1)
VENT
26163 (1)
SIGHT WINDOW
26278 (20)
# 10 SCREW
17540 (20)
1/2” SCREW
Note:
Photos are not depicted to scale.
Quantity used are in parentheses.
CD3 Main Gear Box Parts Identification
General Machine Products Co., Inc. • 3111 Old Lincoln Hwy • Trevose, PA 19053 • USA
TEL: 215-357-5500 • FAX: 215-357-6216 • E-MAIL: [email protected]