General Machine Products Various Corner Blocks - 45° and 90° - Manual

General Machine Products Co., Inc.
Visit www.GMPtools.com for the Tools to help you
Apollo Cable Lasher
Parallel-pull capability
up to 4” bundle
J2 Cable Lasher
Time tested workhorse for
up to 3” bundle
Stainless Lashing Wire
Highest quality lashing wire
that’s guaranteed to work with
our lashers.
70336 B Overlash
Block
This block lets you over-lash
to cable bundles up to 2 in.
(50 mm) across ... and its
affordability lets you use
more blocks for smoother,
neater lashing on new or
rebuild construction.
87265 Clip-On
Block
This tempered
spring steel block
is used to support
cable up to
1” (2.54 cm) dur-
ing cable pullout.
10701 Cable
Block with
Rubber Roller
This economical
block has a rubber
roller & is used for
new strand & over
lash work
10700 Cable
Block with
Aluminum Roll-
er
This economical
block has a Alumi-
num roller & is used
for new strand & over
lash work
General Machine Products Co.
3111 Old Lincoln Highway
Trevose, PA 19053 USA
Tel: +1.215.357.5500
Fax: +1.215.357.6216
Email: [email protected]
Web: www.gmptools.com
“get the job done right”
All rights reserved. No part of this publication may be copied, reproduced or transmitted in any form whatsoever
without the written permission of General Machine Products Co., Inc.
Corner Block Instructions Manual P/N 29567 Rev 3 10/7/2013
General Machine Products Co., Inc.
USER MANUAL
45 AND 90 DEGREE CORNER BLOCKS
General Machine Products Co., Inc. • 3111 Old Lincoln Hwy • Trevose, PA 19053 • USA
TEL: +1-215-357-5500 • FAX: +1-215-357-6216 • EMAIL: [email protected]
70439
45° Corner Block w/
High Strength Plastic
Rollers
70450
45° Corner Block
Aluminum Rollers
70438
90° Corner Block w/
High Strength Plastic
Rollers
70449
90° Corner Block
Aluminum Rollers
70454
Double 45° Corner
Block w/High Strength
Plastic Rollers
70455
Double 90° Corner
Block w/High Strength
Plastic Rollers