Garland GF SENTRY SERIES INFRA-RED SALAMANDER BROILERS - Manual (Page 45)

Parte # 4526026 rev. 03 (06/12/14) Página 45
INSTALACIÓN continuación
Kit Opcional De Interconexión
El suministro de gas a las parrillas salamandra montadas sobre cocinas puede estar interconectado con el suministro a la
cocina, de manera que ambas unidades sean suministradas de una sola conexión de gas. La tubería de suministro de gas
deberá tener un diámetro mínimo de 1” (25 mm) para asegurar que haya disponible sufi ciente capacidad de gas a la presión
especifi cada para suministrar el consumo nominal combinado total de ambos artefactos. El kit opcional de interconexión
consta de los componentes mostrados a continuación.
Kit Opcional De Interconexión De Gas # 4531606 (36”)
MARK HOLE LOCATIONS AND MOUNT
SUPPORT BRACKET (ITEM 6 - 2640700) TO RANGE
BACK WITH (2)#10-16 TEKS SELF-DRILL/TAP
SCREWS (ITEM 11 - F67 - NOT SHOWN) PROVIDED.
ATTACH SUPPORT CLAMP (ITEM 7 - 2640800)
TO SUPPORT BRACKET ( ITEM 6 - 2640700)
WITH (2)#10-24 SELF-TAPPING SCREWS (ITEM 12
F32 - NOT SHOWN) PROVIDED.
15
5
2
9
1
4
10
14 3
8
13 REGULATOR - 4.5" w.c. NATURAL GAS
OR 10.0" w.c. PROPANE GAS
(SUPPLIED WITH RANGE)
REGULATOR - 6.0"w.c. NATURAL GAS
OR 10.0"w.c. PROPANE GAS
(SUPPLIED WITH SALAMANDER/
CHEESEMELTER)
TO INLET OF SALAMANDER/
CHEESEMELTER MANIFOLD
2
2
3
SUPPLIED WITH RANGE
SUPPLIED WITH RANGE
5
CUT TUBING (ITEM 15 - 4531608) TO SIZE AS REQUIRED
TO SUIT SALAMANDER/CHEESEMELTER TOP OR REAR
MANIFOLD INLET CONNECTION
6 7
TO INLET OF RANGE
MANIFOLD
1" NPT GAS SUPPLY
CONNECTION
PIEZA DESCRIPCIÓN CANTIDAD (36”)
1
4.5” W.C 3/4”NPT, Regulator Natural Gas, supplied with Range 1
3/4” ISO 7-1, Regulator Natural Gas, supplied with Range 1
10” W.C 3/4”NPT, Regulator Propane Gas, supplied with Range 1
3/4” ISO 7-1, Regulator Propane Gas, supplied with Range 1
2 Nipple, 3/4” NPT x 1/2” (one supplied with range) 3
3 Elbow, 90deg, 3/4” NPT (one supplied with range) 2
4 Union, 3/4” NPT 2
5 3/4”CC x 3/4” NPT Straight Fitting 2
6 Bracket, Pipe Support 1
7 Clamp, Pipe Support Bracket 1
8 Reducing Elbow, 90deg, 3/4” NPT x 1/2” NPT 1
9 Nipple, 3/4” NPT x 6.5” 1
10 Reducing Tee, 3/4” NPT x 3/4” NPT x 1” 1
11 Screw, #10-16 x 1/2” Hex, Washer Head, Teks Self-Drill/Tap (not shown) 2
12 Screw, #10-24 x 1/2” Pan Head, Self-Tap, Type F (not shown) 2
13
6” W.C 3/4” NPT, Regulator Natural Gas, supplied with Salamander/Cheesemelter 1
10” W.C 3/4” NPT, Regulator Propane Gas, supplied with Salamander/Cheesemelter 1
14 Nipple, 3/4” NPT x 3.5” 1
15 Tubing 3/4” 1