Manual eks electronic-key adapter usb – EUCHNER EKS FSA with USB Interface User Manual
Page 33
Manual EKS Electronic-Key Adapter USB
094485-04-11/13
Subject to technical modifications
Page 33/44
In the EUCHNER Electronic-Key-System USB
(COM#) Properties, select the tab Port Settings
Selecting Advanced... opens a window in which the
virtual COM port can be changed.
The desired virtual COM port can be selected in the
COM Port Number: selection field. Confirm with OK
The change is then immediately visible in the Device
Manager. Now unplug the USB cable and plug it back
in again. This activates the change.
Information!
The EKS communicates with the user
software over the COM port selected here.
Information!
This COM port also must be selected in the
ActiveX module, for example.
The Driver tab displays the installed driver version
(1.3.0.0 in this example)