EUCHNER MHT-G2 - Manual (Page 9)

System Manual Mobile Hand-Held Terminal MHT-G2
10370-01-07/08 9
Configuration of Transponder Coding
Choose the language
For choosing another language, proceed as follows:
In the menu Options, select the command Language.
Choose the language.
Read/write settings
In the menu Options, select the command Configuration.
The window Configuration opens.
Legend:
Œ
COM Port: Select the setting for your read/write head. Usually, this is COM 8

Transponder: Select the Transponder type that shall be read.
CIS3/CIS3A: 16 Bytes
CIS3A-Mini: 116 Bytes or 5 Bytes (read-only data carrier)
CIS3-IBS: 16 kBytes or 32kBytes
EKS Electronic-Key: 116 Bytes
Ž
Beep Tone: Set, whether a signal shall resound at the end of the read /write
process.
Make the necessary settings and confirm with OK.
1.
.
1.





.