EUCHNER MHT-G2 - Manual (Page 3)

System Manual Mobile Hand-Held Terminal MHT-G2
10370-01-07/08 3
Correct use
The mobile hand-held terminal MHT-G e nables the user to read and write data
carriers of the EUCHNER system families CIS and EKS from any location. It is
based on the hand-held-computer PSION WORKABOUT PRO generation . Please
observe the notes for its correct use in the operating instructions given by the
manufacturer.
Exclusion of liability and warranty
If the a. m. conditions for intended use are not kept or the safety instructions not
observed, or else, possible maintenance work is not carried out as required, this
will lead to the exclusion of liability and the loss of warranty.
General safety instructions
Please follow the safety instructions given by the manual of the system manufac-
turer.
Important!
Before using, read the operating instructions and the system manual carefully
and keep these! Make sure that the operating instructions and the system manual
are always at hand for operation, setup and maintenance. Should this system
manual get lost, the document can be downloaded under www.EUCHNER.de.
Structure
The mobile hand-held terminal with pluggable read/write head completes the
EUCHNER Ident Systems CIS. The device is equipped with a compact, removable
read/write head.
For achieving an even better handling, the read/write head can be connected to
the hand-held terminal via a spiral cable. The cable is optionally available (order
no. 071759).
The robust splash-water-proof structure (IP54) guarantees perfect functioning even
under difficult conditions in rough industrial environments.