EUCHNER AS-i Safety Output Relay with four standard inputs - Manual (Page 8)

8 Subject to reasonable modifications due to technical advances Id.-No.: 103573 Issue date - 28.5.2009 EUCHNER GmbH + Co. KG
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
AS-i Safety Output Relay with four standard inputs
General Remarks
2. General Remarks
Please read this chapter carefully before working with the documentation and the
"AS-i Safety Output Relay with four standard inputs".
2.1 Product information
This user manual is valid for the following EUCHNER GmbH + Co. KG devices
:
2.2 Function of this manual
This manual instructs for the safe assembly, electrical installation, addressing,
start-up as well as for the operation and for the maintenance of AS-i Safety Out-
put Relay.
This manual does not provide instructions for operating machines, on which this
module is built in. Please view the appropriate machine manual for corresponding
information.
2.3 Target group
This manual is intended for designers, developers and operators of systems that
will be safeguarded by one or more AS-i Safety Output Relays. The manual is
also targeted to people integrating AS-i Safety Output Relays into machinery, per-
forming the initial start-up, or maintaining them.
2.4 AS-i specifikation 3.0
The "AS-i Safety Output Relay with four standard inputs" is designed according to
the new AS-i specification 3.0.
Earlier specifications (2.1 and 2.0) continue to be fully supported.
AS-i Safety Output Relay with four standard
inputs SOM-4E-0A-C1
Information!
Additional information concerning the technical data as well as the parameterization of
the AS-i Safety Output Relay can be found in data sheet SOM-4E-0A-C1 that can be
located at http://www.euchner.de.